Amica AWM712D, Инструкция по эксплуатации

Страница: 12 / 24

12
III. End of the wash cycle
1.When the wash cycle has elapsed, a brief acoustic signal is sounded.
2.Turn off the water valve
3.Set the programme selection knob to OFF
4.Unplug the appliance from the mains.
5.Open the door and remove laundry.
IV. Cancelling and changing settings
Set the programme selector knob to OFF position for several seconds to terminate a
programme. Then select the desired wash programme.
Using the appliance
I. Programme selection
1.Set the programme selector knob to the desired programme (see the table further on).
2.Change the quantity of water, temperature, spin speed or activate available additional
functions to modify the programme to your individual needs.
3.Press the button.
.
II. Start delay setting
The delayed start function may be used when, for example, taking advantage of discoun-
ted energy tariffs.
Procedure:
1.Set the programme selector knob to the desired programme (see the table further on).
2.Select additional functions or wash cycle parameters as required.
3.Press the button
4.Choose the time setting 1-24 hours.
5.Press the [Start/ Pause] button. The appliance will be set in delay mode. Washing will
commence immediately after the delay time has elapsed.
Attention: If a delay time has been set, the display will show only the delay time in hours
and the Delay indicator will be illuminated. Once the delay time has elapsed,
the DELAY indicator is switched off and the REMAIN indicator is illuminated together
with the remaining washing time.