Amica AWDI914GJ, Руководство по эксплуатации

Страница: 9 / 52

9
The drain hose is at the back of the
machine. Fix the drain hose so that it
does not move while the appliance is
in operation (use the elbow as shown
below). Do not place the hose too deep
into the outlet pipe!
III. Connecting the water supply
IV. Water drain
A supply hose with seals is inside the drum of the dryer-washer.
l
The appliance's mains connection (electrical wall socket) should be in a visible
and accessible place!
l
Only plug the appliance into a properly installed socket with an earth pin!
l
Do not connect to an adaptor or an extension cord!
l
In the event of the power lead being damaged, it must be replaced by an author-
ised technician.
l
The electrical system to which the appliance is to be connected must be pro-
tected with a 10 A fuse.
INSTALL THE APPLIANCE
Water pressure min 0.1 MPa (1 bar), max 1 MPa (10 bar).
Supply the machine with cold water
l
after connecting, make sure the hose is not twisted
l
after connecting the hose and the valve, check they are sealed tight
l
regularly check the condition of the supply hose.
Use the new hoses sup-
plied with the machine.
Do not re-use hoses.
V. Connecting to power supply
max 100 cm
min 60 cm