Amica AWCT 10L, Руководство по эксплуатации

Страница: 12 / 20

12
PrACTiCAL WAshing hinTs
If you want to stop a programme, keep pressing button
until READY lamp is lighted.
If you want to change a programme when the appliance
is in operation, first stop the current pro gramme by press -
ing START button (see above) and then select an other
pro gramme.
If you change position of the programme selector knob
without cancelling the programme, the run programme will
still not be changed.
The appliance is equipped with a lock, preventing the door
from being opened during operation.
To open the door proceed as follows:
l
wait 2 minutes until stops flashing or
l
switch off the appliance using the button and wait ap-
prox. 2 minutes.
Warning!
If the programme has been stopped during
washing and the temperature inside the drum is high,
the door may remain locked until the tem pera ture drops
below 60° C.
It you pull out the mains plug or there is a power failure, the
current programme will not be can celled. It will be re mem-
bered and continued once the power supply appears.
I. Cancelling and changing the pro-
gramme
II. Door lock
III. Power failure