10
Programming the oven
Please note:
•
The semi-automatic and automatic
cooking programmes will only work with
the
main (lower) oven
.
•
The alert beep will cut off after two
minutes if it is not switched off manually.
•
The current time must be set in order
for the functions to work. If you are
unsure whether the current time is
set, switch off the appliance at the
mains supply for approximately 10
seconds and then turn it back on. Set
the time as per the instructions below.
Setting the clock
The clock is preset to 12:00, and will revert to this after a power failure.
When the current time indicator is flashing, touch > or <. When
the correct time is shown on the display, the clock will set after
approximately five seconds’ delay.
To change the clock once it has been set, touch
OK
repeatedly until
the current time indicator flashes, then touch > or <. When the correct
time is shown on the display, the clock will set after approximately five
seconds’ delay.
The minute minder
The minute minder can be used when the oven is switched on or off.
OK
1
2
3
4
6
7
5
Fig. 1
1 Cooking time indicator
2 End of cooking time indicator
3 Minute minder indicator
4 Current time indicator
5 Decrease key
6 Mode key
7 Increase key