27
Clean heat exchanger
As necessary, approx. once every 2 months clean
the heat exchanger filter.
Open the cover.
Unlock three locking levers and take out the heat
exchanger handle.
Clean the rubber sealings at the handle.
Clean the heat exchanger, remove the fluff using
a vacuum cleaner with a dusting brush attached
Re-insert the handle.
Lock three locking levers and make sure that the
levers are in right lock position.
Close the cover until there is a click sound.
Do not touch the heat exchanger with your hand, which may result in causing an injury.
Do not touch the heat exchanger with your hand, which may result in cause an injury.
The fluff accumulated on the filter will block the air circulation, which will increase drying time
and energy consumption.
Disconnect the power cord before cleaning!
Do not operate the dryer without the filter!
Clean the filter after each cycle to prevent fluff accumulation inside the dryer.
Clean heat exchanger
As necessary, approx. once every 2 months, remove the fluff from the heat
exchanger using a vacuum cleaner with a dusting brush attached. Clean the heat
exchanger without applying any pressure. Otherwise the heat exchanger could
be damaged.
