Amica 51GGTCMW Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Amica 51GGTCMW Скачать руководство пользователя страница 16

4. Part : USE OF YOUR OVEN

15

4.1 Use of gas burners

•

:

•

.

Ignition of the burners

To determine which knob controls which burner, check the position symbol
above the knob.

Manual Ignition of the Gas Burners

If your appliance is not equipped with any ignition aid or in case there is a
failure in the electricity network, follow the procedures listed below

For Hob Burners:

To ignite one of the burners, press and turn its knob

counter-clockwise so that the knob is in max. position, approach a match, taper
or another manual aid to its upper circumference. Move the ignition source
away as soon as you see a stable flame.

For Oven Burners:

To ignite the oven burner, press and turn the oven control

knob counter-clockwise so that the knob is in max. position, approach a match,
taper or another manual aid to the ignition hole that is located on the front left
corner of the burner. Move the ignition source away as soon as you see a stable
flame.

For Grill Burners:

To ignite the grill burner, turn the grill valve in the clockwise

position until the marker on the knob points at the grill sign. Then, keep the knob
pressed and approach a match, taper or another manual aid to the holes that are
situated on the burner. Move the ignition source away as soon as you see a stable
flame.

Electrical Ignition

Electrical ignition of gas burners can be done in two ways; depending on the
configuration of your appliance

Ignition by Spark Button (51GGTCM(W)):

Press the valve of the burner you

want to operate and turn the valve in the counter-clockwise direction so that
the knob is in max. position and with your other hand, press the ignition button
at the same time. Press the ignition button immediately, because if you wait, a
build up of gas may cause the flame to spread. Continue pressing the ignition
button until you see a stable flame on the burner.

Ignition Through Hob Valve (micro switch) (601GGDOTm(W)):

Press the

valve of the burner you want to operate and turn the valve in the
counterclockwise direction (clockwise for the grill burner) so that the knob is in
max. position while keeping the knob pressed. The spark plugs will generate
sparks as long as you keep the control knob pressed. The micro switch placed
under the knob will automatically create sparks through the spark plug of the

«
...
14
15
16
17
18
...
»

Содержание 51GGTCMW





























Отзывы:

Нет отзывов