10
''A'' symbol will start to flash after it is connected to the
electrical resource. Press (+) and (-) keys at the same
time. It is also possible to adjust (to increase or to reduce)
the time by pressing to these keys.
This function is used to adjust to cook at wished period
interval. To adjust the cooking period, ''Mode'' key is
pressed until ''dur'' indicator lamp will start to flash. The
wished cooking period is adjusted by using ''+'' and ''-''
keys. Once the time is adjusted, it is registered
automatically in 5 seconds following the adjustment and
''A'' and ''
' symbols start to light continuously. The
screen returns to the current time. An alarm (sound) is
heard when the cooking period ended and ''A'' and ''
''
symbols start to flash. Press onto any switch stops the
signal and the lamp to flash. It is possible to adjust cooking
period between 0-10 hours.
'
-
+
MODE
A
Figure 18
Adjustment of Day Hour
Alarm /Time Setup
This function can be used as time set up and alarm when wished. ''Mode'' key must be
pressed until ‘
‘
led indicator lamp will start to light. The wished period interval is
adjusted via ''+'' and ''-'' keys. The wished time remains on screen after it was
adjusted and ‘
‘
sign that flashed in the past remains fixed. It is possible to make time
set up up between 0-23.59 hours. At the end of cooking period an alarm is heard and
‘
‘
symbol flashes. You can press any key to stop the alarm.
Programming as Determining the Cooking Period
Programming as Determining the Finish Time
This function is used to adjust finish time of the cooking period. To adjust the finish
time of cooking ''Mode'' key is pressed until''End'' indicator lamp will start to flash. The
wished finish time is adjusted by using ''+'' and ''-'' keys. When the finish time is
reached an alarm is heard and you can press any key to stop the alarm.
Programming as Determining the Cooking Period and Finish Time
This function is used to adjust the cooking period by using of automatically
cooking function. Both cooking period and ending time have to be adjusted to adjust
-
+
MODE
A
du r
Figure 20
