Amica 10203.3TzDpsScLbJVSm, Инструкция по эксплуатации

Страница: 29 / 40

29
OPERATION
confirm, you will see "Operation display
brightness" or "Standby display brightness"
or "Night display brightness" depending on
your choice. On the right you will see cur-
rent display brightness expressed in percent
"100%." Touch , to adjust brightness
and touch OK to confirm. Touch to go back
to the previous menu.
When you adjust brightness, current display
backlight brightness remains unchanged
until you confirm.
Default values for operation/standby/night
mode are 80%, 45%, 30%.
5. Handle backlight brightness
Applies only to appliances with backlit han-
dle. "Set handle backlight brightness" will be
displayed on the left. On the right you will
see current display brightness expressed
in percent "100%." Touch , to adjust
brightness and touch OK to confirm. Touch
to go back to the previous menu.
When you adjust brightness, current handle
backlight brightness remains unchanged
until you confirm.
The default handle backlight brightness is
75%.
6. Service.
The service menu is for information only and
no settings can be adjusted. Touch or
to go through all the items and touch OK or
to go back. Menu items:
User interface firmware version
Power board firmware version
Current error:
Previous error:
List of errors:
- blank – no error;
- E0 - temperature sensor error
- E1 - meat probe sensor error
7. Factory settings.
The message will be shown: Restore factory
settings? Touch OK to restore factory set-
tings and go back or to abort and go back.
The and touch sensors are inactive.
When you restore factory settings all set-
tings for programmes, Kitchen Timer, Timer
and Duration are cleared.
Default factory settings:
- Language: English;
- backlight brightness: 80%/45%/30%;
- Backlight: ECO;
- Oven: ECO;
- Clock : 24h (current time is unaffected).
In order to switch on the roaster you need to:

Choose one of the heating functions
.

Heat the oven for approx. 5 minutes (with
the oven door shut).

Insert a tray with a dish onto the appropri-
ate cooking level; and if you are roasting
on the grate insert a tray for dripping on
the level immediately below (under the
grate).

Close the oven door.
Using the roaster.
The roasting process occurs as a result of the
infrared rays emitted by incandescent radia-
tor, which are absorbed by the food.
Important!
When roasting it is recommended that
the oven door is closed.
When the roaster is in use accessible
parts can become hot.
It is best to keep children away from
the oven.