OPERATION
19
Meat probe
When you connect the meat probe, in each
function selector knob
position except
CLEANING and
0
, the displays shows and
the set temperature (80°C by default).
You will hear the [confirmation 2] beep when
meat probe is detected. Now you can set
the core temperature to be achieved when
heaters will be turned off. Touch twice to set
the desired core temperature (when touched
once you set oven cavity temperature, when
touched twice you set meat probe core tem-
perature). Meat probe core temperature starts
flashing. Use the
setting selection knob
to
adjust it in the range 30°C – 99°C. To u c h
to confirm. If you do not confirm within 5
seconds the current temperature setting is
accepted.
When using the meat probe, ECO function
is active and the heaters are turned off
2°C before reaching the desired tempera-
ture to continue cooking with residual heat.
Cooking ends 5 minutes after the heaters
are turned off. The [end time] beep is emit-
ted and meat probe core temperature and
the
symbol flash. Touch any control to
silence the alarm or wait 1 minute. If you
do nothing the appliance will enter standby.
Touch twice and increase temperature to
continue cooking.
The meat probe symbol and core temperature
go out when you unplug the meat probe. You
will hear the [end] beep when meat probe is
unplugged.
When turn off the oven by setting the func-
tion selector knob to
0
with the meat probe
plugged in the display will show the current
residual heat temperature. The meat probe
symbol and core temperature are not dis-
played.
Recommended meat probe temperature
settings
Important!
Only use the meat probe recom-
mended for this oven.
Type of meat
Temperature
[°C]
Pork
85 - 90
Beef
80 - 85
Veal
75 - 80
Lamb
80 - 85
Venison
80 - 85
