Amica 10147.3ETsDbHaScJQaS, Инструкция по эксплуатации

Страница: 23 / 32

CLEANING AND MAINTENANCE
3. Pull the inner glass panel from its seat
(in the lower section of the door). Re-
move the inner panel (fig. D).
4. Clean the panel with warm water with
some cleaning agent added.
Carry out the same in reverse order to
reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
Important! Do not force the upper
strip in on both sides of the door at
the same time. In order to correctly fit
the top door strip, first put the left end
of the strip on the door and then press
the right end in until you hear a “click”.
Then press the left end in until you hear
a “click”.
Removal of the internal glass panel
D
1
2
3
1
2
3
1
2
3
Replacement of the oven light bulb
In order to avoid the possibil-
ity of an electric shock ensure
that the appliance is switched
off before replacing the bulb.

Set all control knobs to the position “

”/“0”
and disconnect the mains plug,

unscrew and wash the lamp cover and
then wipe it dry.

unscrew the light bulb from the socket,
replace the bulb with a new one – a high
temperature bulb (300°C) with the follow-
ing parameters:
- voltage 230 V
- power 25 W
- thread E14.

Screw the bulb in, making sure it is prop-
erly inserted into the ceramic socket.

Screw in the lamp cover.
Oven light bulb
23