A9245-D User Guide
© AMIC 2010
– All rights reserved
p
7 of 8
Rev 1.2
4.
Connect to A9245-D UHF RFID Readers
Step 1:
Connect antenna to the reader.
Step 2:
Connect RS-232 cable to the rader and the host PC.
Step 3:
Plug in the power cord into the DC power jack.
Step 4:
Plug in power
supply’s power cord into AC power source.
Step 5:
Launch the demo utility software included on the Demo Utility CD. For details
of the demo utility please see demo utility user guide on the CD-ROM. To develop
customized UHF RFID reader software, please see information on the SDK CD-ROM for
detail.
Warning:
Antenna should be connected before connecting power to the DC jack to
avoid any potential damage to the reader unit. RFID reader antenna should NOT be
connected / disconnected when power is supplied to the reader unit. Failure to follow
this instruction will void the product warranty.
