Amibot Swift, Руководство пользователя

Страница: 16 / 112

14
Troubleshooting
EN
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
04
The robot does
not move cor-
rectly.
1. The floor is wet.
2. The dustbin is not
attached correctly.
3. The gap sensors
are dirty.
4. The robot is used
on dark-coloured
floors.
1. Dry the floor.
2. Remove and reinsert the
dustbin.
3. Clean the gap sensors
with a soft cloth.
4. Place the robot on a light-
coloured floor.
05
The LED light
flashes blue
even after
charging for 4
hours.
1. Charging was
interrupted.
1. Check that the robot is
plugged into the adapter
and mains supply.
06
The robot does
not start.
1. The battery is not
inserted correctly.
2. The battery is too
weak.
3. The robot is
switched off.
1. Check that the battery is
inserted correctly.
2. Charge the robot until the
LED light is steady blue.
3. Switch the robot on by
pressing the power button
for 3 seconds.