amiad 4" Sigma Pro, Руководство по установке и эксплуатации

Страница: 4 / 41

4
Installation & Operation Manual | Sigma Pro
Technical Specification
General data 4" Sigma Pro 6" Sigma Pro 8" Sigma Pro
Max. flow rate* (130μ)
in average water quality
120 m
3
/h
(528 GPM)
180 m
3
/h
(792 GPM)
280 m
3
/h
(1233 GPM)
Min. operating pressure
when cleaning 1.5 bar (22 psi) - electronic controller
2.5 bar (36 psi) - hydraulic controller
Max. operating pressure 10 bar (145 psi)
Filtration area 6000 cm
2
(930 in
2
) 8000 cm
2
(1240 in
2
)
Inlet/Outlet diameter 4 ” (100 mm)
Flange & Victaulic
6 ” (150 mm)
Flange
8 ” (200 mm)
Flange
Weight Empty: 75 kg (165 lb)
Full: 145 kg (320 lb)
Empty: 110 kg (243 lb)
Full: 225 kg (496 lb)
Empty: 120 kg (264 lb)
Full: 235 kg (518 lb)
* Maximum flow rates depends on water quality and micron size.
Hydraulic controller
Rinse controller PP (Polypropylene), PA (Polyamide)
DP switch Built-in rinse controller set at 0.5 bar (7 psi)
Operation mode 3-way ball valve, indicate: automatic or manual
Electronic controller
Control power supply 4 X AA type 1.5V batteries / External 7-14V DC
Solenoid operation data 12-9V DC latching solenoid
DP switch Integral sensors
Flushing data
Exhaust valve 2 ” (50mm)
Flushing time 10 seconds
Reject water volume
per flush cycle
75 liters (20 gallons) 90 liters (23 gallons)
Min. flow for flushing
(at 1.5 bar/22 psi) 34 m
3
/h
(150 GPM)
36 m
3
/h
(158 GPM)
Construction materials
Filter housing and lid
RPP (reinforced polypropylene)
RPA (reinforced polyamide)
Screens Molded weavewire stainless steel 316L
Cleaning mechanism PBT (Polybutylene)
Exhaust valve Polymeric
Seals EPDM
Control command tubing PE (Polyethylene)
Standard filtration degrees
Micron 500 300 200 130 100 80
mm 0.5 0.3 0.2 0.13 0.1 0.08