AMI Analyzer Manual
Short-form Installation Procedure
9
8. If you want to name the analyzer, click on the “User ID:” box. A dialog box will come up, asking for
a password. Use “AMI” as the password, and then write in up to 12 characters as a name for the
analyzer.
9. Set up the output range, that is the range used by the analog output to scale the output for your
monitoring device. People often use 100ppm in the natural gas world.
10. Make sure the security settings are the way you want them.
11. Make sure the display shows the correct output type, 1-5V or 4-20mA.
12. Go through the analog output calibration procedure if desired.
13. If you are installing the sensor, click on the New Sensor button and write in the serial number.
14. Check the analyzer date and time is correct (we set it up for Pacific Standard time, which may not
be correct for you). You can send the computer time to the analyzer by clicking the Set Analyzer
Time button.
15. Clear the stored data by clicking the “Clear Data” button in the DATALOG section on the right.
