AMI NGX MINI 2, Инструкция по установке и эксплуатации

Страница: 9 / 48

NGX Mini 2 Jukebox 7 22022623 Rev B
Jukebox Power and Reset Switch
The NGX MINI 2 jukebox is powered from a standard
115VAC wall plug using the provided power cord.
Inside the jukebox, power is routed to a power
distribution assembly located on the left-hand side of
the cabinet (see
Figure 1-B
). This assembly includes
a 10 amp fuse and separate power ON/OFF switch.
All other components in the jukebox are powered by
plugging them into this power distribution assembly.
Soft Power Down
The Core Computer and other components in the
jukebox should remain powered up at all times.
However, there may be times when the jukebox
needs to be turned off so that customers cannot
insert money or make selections. The soft power
down mode will give every outward appearance that
the jukebox is off by turning off the lights, the LCD
display, the bill acceptor(s), and the credit card
reader; however, the Core Computer and other
internal components remain powered up. There are
multiple ways to enter and exit this soft power down
mode:
•
Core Computer Power Button – The button
labeled “POWER” on the Core Computer
inside the jukebox (see
Figure 1-B
) is used to
enter the soft power down mode. Push it
again to exit the soft power down mode.
•
IR Remote Control – The button labeled
“POWER” on the IR remote control
transmitter will also toggle the soft power
state just like the button described above.
•
6 Button Wired Volume Control – This
control can be modified to provide a POWER
function. See
Wired 6 Button Volume Control
on page 10 for details.
Computer Core
The jukebox Computer Core can be powered off by
pressing the “SERVICE” button on the Computer
Core (see
Figure 1-B
), and then touching “Shutdown
Jukebox” on the touchscreen. This will turn off the
Computer Core and other components that get their
power from the ATX power supply in the Computer
Core. To restore power after turning off the ATX
power supply, the jukebox must be rebooted. Reboot
the jukebox by toggling off the main power ON/OFF
switch (see
Figure 1-B
) and then toggling it back on,
or by pushing the ATX Reset Switch (see “ATX Reset
Switch”).
Hard Power Down
When the jukebox power cord is unplugged or the
main power ON/OFF switch is turned off (see
Figure
1-B
), the jukebox is in the hard power down state. All
power is removed from all components in the
jukebox.
ATX Reset Switch
There is a hidden ATX reset switch located inside the
cabinet on the upper-left side just below the cooling
fan (see
Figure 1-B
). It is accessible by either
opening the jukebox door, or by inserting a paper
clip, toothpick, or other long, thin object through the
access hole on the left side of the jukebox.
•
The ATX Reset Switch resets the Computer
Core. This is like the reset switch on a PC.
Pressing and releasing this switch will cause
the computer main board to completely
reboot. Use this switch only if the jukebox is
completely non-responsive. Additionally,
when the Computer Core has been powered
down using the “Shutdown Jukebox” option
in Service Mode, pushing this button will
restart the computer.