AMI EMB-B75B, Руководство по установке

Страница: 5 / 12

Page 5 of 12
22166955
REV. C
Assembling the SATA Hard Drive with the Adapter Mounting Bracket
10. Secure the SATA hard drive 22219001 (Item #2) to the SATA Mounting Adapter Bracket
40980802 (Item #4) using the four M3 x 6 metric screws 28277901 (Item #16) as shown in
Figure 4.
Figure 4
The following pages describe installing the hard drive in the different computer core models.
Continue to the step # relating to the core you are reworking.
221674XX Step 11
611765XX Step 14
61171001 Step 15
61171002
Step 16
70260-1A Step 17
View Core Step 18
Connecting the SATA Hard Drive to the 221674XX Series Computer Core
11. Disconnect the 4-pin power cable and IDE cable from the hard drive tray. Remove the four
screws that mount the hard drive tray. The tray will not be reused, but you must save the
screws for use in the following step. See Figure 4.
Figure 5
HARD
DRIVE
M3X6 METRIC
SCREWS
(TWO ON
EITHER SIDE)
ADAPTOR
BRACKET
REMOVE
POWER AND
IDE CABLES REMOVE THE
SCREWS TWO
ON EITHER
SIDE