manualshive.com logo in svg

AMI CPC-2245 Series, Руководство пользователя

Поделиться
Скачать
AMI CPC-2245 Series Скачать руководство пользователя страница 51

42

CPC-2245  User's Manual

Onboard Parallel Port

This option enables the parallel port on the CPC-2245 and
specifies the parallel port's base I/O address. The settings are
Disabled, 378/IRQ7, 3BC/IRQ7 and FDD. The default setting is
378/IRQ7.

The CPC-2245's floppy interface and parallel port share the same
pin assignment. When "On board Parallel port" is setting to FDD,
floppy drive will be enabled and printer port will be disabled. If
"On board Parallel port" is setting to either Disabled, 378/IRQ7 or
3BC/IRQ7, printer port will be enable but floppy drive will be
disable.

Parallel Port Mode

This option specifies the parallel port mode. The settings are SPP,
EPP, ECP and EPP+ECP.

Setting

Description

SPP

The normal parallel port mode is used.

EPP

The parallel port can be used with devices that

adhere to the Enhanced Parallel Port (EPP) specification.

EPP

uses the existing parallel port signals to provide

asymmetric bidirectional data transfer driven by the host device.

ECP

The parallel port can be used with devices that

adhere to the Extended Capabilities Port (ECP) specification. ECP
uses the DMA protocol to achieve transfer rates of approximately
2.5 Mbs. ECP provides symmetric bidirectional communications.

Содержание CPC-2245 Series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды