AMI Marine X2, Руководство по эксплуатации

Страница: 9 / 33

Page 9 of 33
08011 - X2 VDR and S-VDR System Operation Guide Iss01 Rev03
Product Introduction and Overview
AMI’s new “X2” VDR / S-VDR and the associated interfaces have been developed using expertise
gained over two decades in marine electronics design, interfacing and retransmission. The result is a
system designed and built in the UK that not only meets the mandatory regulations, but offers more
flexibility, functionality and features to the end user than ever before. The system is in compliance
with MSC.333(90), and approved to IEC 61996-1 Ed 2.0 relevant to voyage data recorders installed
on or after 1 July 2014, and conforming to performance standards not inferior to those specified in the
annex to resolution A.861(20), as amended by resolution MSC.214(81) for systems installed prior to
1
st
July 2014
Main Electronics Unit (MEU)
MEU-0017
The MEU has a key-locked front door for secure access and a tamper switch ensure that any access
to the internal circuitry of the MEU is logged.
The Key Switch Board has LEDs to indicate the VDR status and a key switch for switching the system
on and shutting the system down.
Features
•
10 x Audio inputs
•
20 x NMEA inputs (Variable baud rates)
•
Up to 4 x RADAR DVI/VGA capture inputs
•
Dedicated Network connections for ECDIS Image capture via IEC 61162-450.
•
Ethernet port at TSM for convenient, high speed data download