COPYRIGHT © 2011 AMI ENTERTAINMENT NETWORK, INC.
MEGATOUCH ION RX OWNER’S MANUAL PM0721-09
Site Preparation
In determining the location for your Megatouch
Ion video game, consideration must be given
to a suitable, grounded electrical outlet. Since
the game is a computerized device, it should
have a separate circuit, if at all possible. If a
separate circuit is not available, care should
be taken to provide a clean and constant volt-
age. As a basic guideline, never connect the
unit to a circuit that also supplies power to
freezers, coolers or other high power consum-
ing and electrical noise generating equipment.
Place the game in a location where nothing
will interfere with proper ventilation. The game
should not be exposed to any dripping or
splashing liquids. Objects filled with liquid
should not be placed on the unit.
Setting up your Megatouch Game
1.
After removing the game from the car-
ton, attach the power cord to the back
of the game near the ON/OFF switch.
Plug the game into a standard, grounded
AC outlet.
2.
Turn the power switch at the back of
the game to ON and wait for it to go
through its boot-up sequence. The game
will display the Main Menu Screen.
3.
The machine has been preset at the
factory and should not need to be ad-
justed, however it is recommended that
the screen be calibrated (see
Touchscreen Calibration
) and the
coin and/or bill acceptor(s) be tested.
1
4.
There are many custom settings avail-
able for the game. To customize the set-
tings, follow the software instructions in
this manual.
Game Description
The Rx model has one lock located on the
back of the unit. To open the unit, unlock this
lock and lift the front bezel from the rear of
the system. It comes equipped with a coin
mech and/or bill acceptor. This model also has
couplers installed in the rear of the game. These
are used for future hardware upgrades which
include linking and modem capabilities. Each
game comes equipped with a wireless USB
adapter that can be used to wirelessly link
two Ion games together. With the addition of a
wireless router, the game(s) can also connect
to the Internet. The Linksys 802.11G router is
recommended. For more information, see
Con-
nection Wizard
.
All of the major components of the Rx sys-
tem are located inside the cabinet, which
can be opened by unlocking a single lock.
These components include the motherboard,
LCD monitor, I/O board, power supply, hard
drive, coin box, and bill acceptor. On the I/O
board (see Figure 34) there are
SETUP
and
CALIBRATE
buttons. Pressing the
SETUP
button will bring you to the Main Menu Screen
(see Figure 1). From this screen you can
then adjust the operator options to best suit
your particular needs. For calibration instruc-
tions, please see the next section of this
manual.
IMPORTANT NOTICE
While the Megatouch Rx is weather-resistant and designed to channel water away from
internal electronic components, it is not weatherproof. It is recommended that the Rx be
placed in a protected environment out of direct rain and sunlight, such as under a canopy
or awning. If the game does get wet, please turn it off and allow it to dry completely before
continuing play.
When placed outdoors this unit should be properly grounded by using a GFCI (ground fault
circuit interrupter) outlet. Additionally, all extension cords used should be heavy-duty and
rated for outdoor use.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200