3.2 Installing
T-Flash
Card
The T-Flash card is a pluggable mobile storage card inside the mobile phone.
To install the T-Flash card, open its latch, place its indented side downward,
insert the card into the card slot, and then close the latch.
To remove the T-flash card, open its latch and slightly press the card inward. The
card will automatically pop out. Close the latch.
Note:
1. The mobile phone cannot automatically identify the T-flash card being inserted
when the mobile phone is powered on. You must power off the mobile phone and then
power it on, so that the phone can identify the T-Flash card.
2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear
that children swallow it!
3.3 Charging the Battery
The lithium battery delivered with the mobile phone can be put into use
immediately after being unpacked.
Battery level indication:
Your mobile phone can monitor and display the battery state.
Normally the remaining energy of the battery is indicated by the battery level
icon at the upper right corner of the display screen.
When the battery energy is insufficient, the mobile phone prompts "Battery
low". If you have set an alert tone, an alert tone will be given off when the
battery level is too low.
A charging animation appears when the battery is being charged. When the
charging is complete, the animation disappears.
Using a travel adapter:
Install the battery into the mobile phone before charging the battery.
Connect the adapter of the travel charger with the charging slot in the mobile
phone. Ensure that the adapter is fully inserted.
Insert the plug of the travel charger to an appropriate power outlet.
During the charging, the battery level grids in the battery icon keep flickering
