AMGOO AM215, Руководство пользователя

Страница: 8 / 26

8
you are prompted to input any of the codes mentioned below, just input the
correct code and then press the OK key. To modify the PIN, PIN2, and/or
phone lock code, choose Settings > Security setup > Change password.
Phone lock code
The phone lock code may be set to prevent your mobile phone from
being misused. In general, this code is provided along with the mobile
phone by the manufacturer. The initial phone lock code is set to 1234r.
Installing T-Flash Card
Note:
The mobile phone cannot automatically identify the T-flash card being
inserted when the mobile phone is powered on. You must power off the
mobile phone and then power on, so that the phone can identify the
T-Flash card.
Charging the Battery
The lithium battery delivered with the mobile phone can be put into use
immediately after being unpacked. A new battery will have maximum
performance after the first three full charge/discharge cycles.
Note:
Ensure that the plug of the charger, the plug of the earphone and USB
cable are inserted in the right direction. Inserting them in a wrong direction
may cause charging failure or other problems.
Before the charging, ensure that the standard voltage and frequency of
the local mains supply match the rated voltage and power of the travel
charger.
Using the Battery
The performance of a battery is subject to multiple factors: radio