23
e. Once the lift cannot be lowered from the highest position when press
Down
↓
during
idling test , Turn the 2 shutoff valves quickly into oil filling position (fig 28), then quickly
to normal working position ( fig 29).
Note: This operation of turning the handles should be finished quickly.
VI. OPERATION INSTRUCTIONS
To lift vehicle
1. Keep clean of site near the lift, and down the lift to the lowest position;
2. Drive vehicle to the platform and put on the brake;
3. Turn on the power and push the button
UP
,
raise the lift to the working position;
Note: make sure the vehicle is steady when the lift is raised
4. Make sure the platforms are in the same level before working then turn off the power
switch
To lower vehicle
1. Cleaning the obstacles around or under the lift, and make sure no people around
under the lift.
2. Turn on the power switch, push the down button
Down
to lower the lift, the lift is
lowered continually and stopped at the height 300mm from ground. Keep feet clear
off lift, push button
DOWN
while push the
Lowering Alarm Button(black)
at the
side of control cabinet, the lift will be lowered to ground with alarm tone;
3. Driving away the car.
4.
Turn off the power switch.
Содержание XL-7
Страница 1: ...Original On Surface Scissors Lift Model XL 7 ...
Страница 4: ...2 View B Other option Fig 2 ...
Страница 16: ...14 IV EXPLODED VIEW MODEL XL 7 Fig 23 P1 P2 38B ...
Страница 22: ...20 4 4 ELECTRIC POWER UNIT 071203 Fig 27 220V 60HZ 1 Phase ...
