AMG Insta-Therm, Инструкция по эксплуатации

Страница: 13 / 16

13
Troubleshooting
1. Consistent low temperature readings:
• The probe is not positioned properly in the ear canal.
- The tip of the probe must be fully seated against the
opening of the ear canal. Failure to properly position
the probe may lead to a low temperature reading.
• The waterproof lens is dirty.
- Thoroughly clean the lens with a soft, alcohol-
moistened cotton cloth.
2. Temperature taken is not within the measuring range.
• Scanning sequences are not operated in the ear canal.
- It may occur if you operate the scanning sequences
before placing the ear thermometer in the ear while the
ambient room temperature is not within the measuring
range (see “Technical specifications”). Remember not
to release the SCAN button until the thermometer has
been removed from the ear canal.
3. Low battery warning
• Battery is too low to take measurement.
- Replace the battery (see “Battery installation).
4. The thermometer will emit short and rapid beep sounds
and the ear or forehead symbols will flash if the
thermometer is not ready to take a measurement.
Simply press any button to stop the temperature
measurement process. Wait until the symbol stops
flashing and beeping sounds stop before attempting to
re-take a temperature reading.