INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
3
2
AMP
®
BurrowPro Well Light
AWL-5001-4-B-BZ
Install Lamp Holder
Install Lamp
Attach the lamp holder onto the “U”
Bracket and line up the holes on
them. Pass the screws through the
holes and secure with the nuts.
“U” Bracket
Lamp Holder
Screw
Nut
Use PAR36 lamp with correct wattage
and type marked on fixture label.
Pass supply wires through the center
of the lamp holder. Connect supply
wires to the bottom of lamp. Snap
lamp onto lamp holder and then push
“U” bracket with lamp into tube.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to handle
lamp.
Tube
Supply Wire
Lamp
“U” Bracket
Lamp Holder
