AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 4 of 8
AMG5712 Instruction Sheet D17048-
02.doc
Connections
Video Output Connection
Connector ............................................75 ohm BNC Socket.
Output Impedance ...............................75 ohm terminated.
Output Level ........................................1 Volt p-p nominal
Frequency Response...........................10Hz to 7MHz.
Optical Connections
No. of Optical Connections ..................1 per video channel
Optical Fibre ........................................Singlemode
Connector ............................................SC/PC
Primary Optical Sensitivity...................-30dBm
Receive Wavelength............................1310nm
Minimum Optical Dynamic Range .......20dB.
Power Connection
Connector Type ...................................Removable 2-pin, 3.81mm, Screw Terminal
Connector Partno.................................Phoenix 1803578
Supply Voltage.....................................+12 to +15 Volts DC
Maximum Power ..................................1.5 Watts
Front Panel Indicators
Power LED
Power / Video / Opto............................Green
-
Video present & opto sync.
R/G
-
Opto sync. but no video present.
Red
-
No opto sync.
Off
-
No power applied to unit.