AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 5 of 8
AMG3723 Instruction Sheet D18013-
01.doc
Connections
Video Input Connections
No. of channels.................................... 2
Connector ............................................ 75 ohm BNC Socket.
Input Impedance.................................. 75 ohm terminated.
Input Level ........................................... 1 volt p-p nominal
Frequency Response .......................... 10Hz to 7MHz.
Optical Connections
PRIMARY OPTO OUT
Connector ............................................ LC/PC
Optical Fibre ........................................ One fibre - Singlemode
Primary Optical Launch Power............ -5dBm
Wavelength.......................................... 1310nm
Primary Optical Sensitivity................... -22dBm
Wavelength.......................................... 1310nm
Power Connection
Connector Type ................................... 2.1mm screw lock long power jack – centre positive
Connector Partno. ............................... Switchcraft S761K, AMG G16125-00
Supply Voltage .................................... 13.5 to 18.0 Volts DC.
Maximum Power ................................. 5 Watts
Data and Audio Channel Connections
DATA CHANNEL A
Data Channel A ................................... 1 channel
Data Connector ................................... RJ45
Channel A Interface
On Board Data Interface – RS232, RS422 or RS485. Selected by slide switch
above RJ45 connector.
RS485 – switch position - high (closest to BNC connections)
RS422 – switch position – middle
RS232 – switch position – low (furthest from BNC connections)
DATA CHANNEL B
Data Channel B ................................... Not Present
