AMG-Sicherheitstechnik NR-03, Важное примечание

Страница: 15 / 18

Seite 14 von 17
AMG Sicherheitstechnik GmbH

Industriepark Straße A-9

39245 Gommern

Telefon 039200-7797-0

Freecall 0800-2264264*

Fax 039200-7797-29

www.amg-sicherheitstechnik.de

info@amg-sicherheitstechnik.de

Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Turn off beeps
With this command you can control the beep sounds when pressing the SOS key.
beep1 can be used to switch off the beep tones and then the device will only vibrate
when the SOS button is pressed.
With
beep0 they are switched on again.
Switch LEDs on and off
Send
LED1 as SMS text to the GPS emergency transmitter to turn off the LEDs on the
unit.
To switch the LEDs on again, send
LED0 as SMS text.
Switch off the SMS alarm
You can deactivate the sending of SMS messages by pressing the SOS key with the
command
SMS0 , then only the call will be stopped in case of an alarm (if it has not been
switched off as well).
To turn SMS sending back on send:
SMS1
Switch off alarm call
You can switch off the automatic call by pressing the SOS key with the command CALL0 ,
then only the SMS will be canceled in the case of an alarm (if it has not been switched off
as well).
To turn the call back on send:
CALL1
SMS Define the name of the emergency call station
For the GPS emergency transmitter, a name can be specified, which is sent at the
beginning of each reply SMS. This helps identify multiple devices. Send the following text
text message to the phone number of the GPS emergency transmitter:
Name1,Matthias
Replace the name "Matthias" accordingly with the desired name. To delete the name,
send the text
name0 .
Automatic call acceptance
If you call the device from one of the three SOS numbers, the device will answer the call
automatically after a short time and set up a voice connection.
Cancel automatic call acceptance restriction
With this command, the automatic acceptance of all calls can be controlled.
To enable automatic answering of all calls, send
Z1 .
To only accept calls from SOS numbers automatically, send
Z0 .