AMG-Sicherheitstechnik NR-03, Важное примечание

Страница: 14 / 18

Seite 13 von 17
AMG Sicherheitstechnik GmbH

Industriepark Straße A-9

39245 Gommern

Telefon 039200-7797-0

Freecall 0800-2264264*

Fax 039200-7797-29

www.amg-sicherheitstechnik.de

info@amg-sicherheitstechnik.de

Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
SOS emergency
Up to 3 SOS telephone numbers can be stored.
Trigger on the emergency call device
The emergency call is triggered by pressing the SOS button for 3 seconds. Then a
position message (SMS) is sent to all stored SOS numbers.
Triggering via radio transmitter
While the emergency call device is in the base station (the device must lock
correctly) , you can also trigger the alarm using the learned radio transmitters by
pressing and holding the emergency call button on the transmitter for 3 seconds.
Expiry of the emergency call
The 3 SOS numbers are called in turn. If no subscriber accepts the call, the process is
repeated after 5 minutes until a subscriber accepts the call. To end the call, press the
SOS button again.
IMPORTANT NOTE:
When setting up emergency numbers, please check at
what point the mailbox will be activated by the
subscriber.
(about 40 times ring each mailbox different)
Perform a test run with all stored telephone numbers, so
that the person's SOS emergency call does not get stuck
in the mailbox !!!
Manual GPS location
Send the command
LOC via SMS to the GPS emergency transmitter.
This command will send you the current coordinates as a link via SMS.
Example:
"GPS Info! Time: xxxxx; Lat: xxxx; Lon: xxxxx; Spd: xxxx; Altitude: xxxx Bt: xxx
maps.google.com/maps?q=loc:22.647379,114.030998
The coordinates are always sent as latitude and longitude with a Google Maps link, which
directly displays the position of the person. We recommend using the Google Maps link.
Set number for side key
You can choose which of the 3 programmed phone numbers you want to call when
pressing the side key by simply sending the following command:
X1 = for the first number
X2 = for the second number
X3 = for the third number
By default, the second number is set.