Seite 10 von 17
AMG Sicherheitstechnik GmbH
Industriepark Straße A-9
39245 Gommern
Telefon 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Functionality:
As soon as the case has been registered, the device starts to beep at
short intervals, in the case of an unwanted trip you now have the option
of canceling the alarm by pressing the SOS button. Otherwise, depending
on the setting, an SMS with the message "Fall Down Alert!" And a Google
Maps link of the last ascertainable position, or the SMS and a call to all
programmed subscribers will be sent.
SMS commands:
The command to control the fall sensor consists of the abbreviation FL
followed by the desired function, and in the case of FL1 optionally a
comma and the desired sensitivity.
The functions are as follows:
0 = switch off sensor (standard)
1 = SMS
2 = SMS and call
Sensitivity can only be set with
FL1
, with
FL2
the additional call is
activated, or if the fall sensor was deactivated, it is activated with the last
used sensitivity level.
Once the call function is activated, the sensitivity can be changed with
FL1, [Sensitivity]
without deactivating the call.
To deactivate the call again, the fall sensor with
FL0
must first be
deactivated and can then be reactivated with
FL1
, or
FL1, [Sensitivity]
.
Sensitivity can be set from
1 to 9
, where 1 is the most sensitive setting
and 9 is the most insensitive, default on delivery 5.
We recommend initially setting the sensitivity to 1 and only gradually
reducing it when there is an increase in unwanted alarms.
Example:
To activate the sensor with SMS sending and maximum sensitivity, the
command is:
FL1,1
To activate the sensor with SMS for the last programmed sensitivity, the
command is:
FL1
To activate the sensor with call and SMS for the last programmed
sensitivity, the command is:
FL2
To turn off the sensor, the command is:
FL0
