Page
33 of 35
head office starts making the telephone connection. Depending on the GSM reception,
there may therefore be a different number of rings on the called telephone. If the GSM
connection is bad, it will take longer for a connection to be established and
correspondingly less rings or time remaining after the call is accepted.
The call is only intended to alert you to the alarm confirmation. You will not hear any
text or sounds when answering the call. No input is required for confirmation on your
phone.
If desired, you can simply wait for the call to end automatically. Noise is recorded by
the alarm center and made available to you in the online portal or in the Bluetosec
Controller app.
Only telephone numbers stored here are authorized to switch the control panel
remotely by telephone. You can save up to 5 numbers.
Each stored SMS number is notified by the head office in case of alarm.
Only SMS numbers stored here are authorized to remotely switch the control panel via
SMS. Define whether you would like to be notified by SMS in the event of a power
failure or arming / disarming control panel. You can save up to 10 e-mail addresses.
Please note that you have phone numbers and SMS numbers have to save
once each. It will not pull both options from a number here.
SMS-Commands
You can control the control panel with various SMS commands.
This requires the phone number from which you want to send the SMS commands to
be included in the list of SMS numbers, and to have the SMS command receive
permission from that phone number.
The following SMS commands are available:
ARM:
(Your) master PIN code plus arming area
Example (without spaces, all in lower case):
12345erdgeschoss
DIS-ARM:
(Your) master PIN code plus blurred
Example:
12345unscharf
Содержание CT-Sensor
Страница 1: ...Page 1 of 35 ...
