AMF 90XL
i
PINSPOTTER
400-088-011
Page 2-2
Rev. 10/04
2.1
Positive Ball Lift Description
The purpose of the ball lift is to raise the ball high enough to permit a gravity return to
the bowler. The 90XLi Pinspotter’s Positive Ball Lift is equipped with AMF’s
Gripper
Ball
Lift system ensuring reliable operation even with today’s heavily oiled lanes. The ball lift
consists of a number of separate assemblies that work together to achieve the desired
result. These assemblies are (refer to Figure 2-1):
•
Ball Lift Assembly
•
Light Ball Sensor
•
Ratchet Drive Assembly
•
Track
Rail
Assembly
•
Belt Tensioner
•
Belt Tightener
2.2
Positive Ball Lift Removal
1. Turn off power to both pinspotters.
2. Remove the upper and rear ball lift guards.
3. Remove the two springs and extension rods, the two belt tightener springs, and the
ratchet drive belt tensioner spring from between the pinspotters.
4. Remove the carpet drive belts, the ratchet drive belt, and the upper paddle drive
belt from the PBL pulleys.
5. Remove the clamp studs from the upper and lower ball lift shaft mounting brackets,
and lift the ball lift assembly out of pinspotter.
2.3
Positive Ball Lift Installation
1. Place the upper ball lift assembly shaft in the upper support brackets on the
kickback plates.
2. Place all V-belts in position on the lift pulleys.
3. Put the lower ball lift shaft in the lower support brackets.
4. Install the clamp studs keeping the nuts loose.
5. Adjust the upper and lower shafts to center the lift with the track rails in accordance
with Section 2.11
6. Verify that the ball lift is aligned with the track rails. Adjustment is required when
the ball lift shaft support brackets on the kickback plates are not aligned directly
across from each other or are not at the same height.
Содержание 90XLi
