Amewi YAK 11, Руководство пользователя

Страница: 28 / 30

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL YAK 11
ENG
LISH
28
In the last step, connect the servo-cables of the wing to the
patch cables described above. Then screw the wing to the
fuselage (4x).
The centre of gravity is measured on the top of the wing in the
case of a low-wing aircraft; the model must be in the back
position for this. The centre of gravity is located after the
leading edge at 110-115 mm, measuring point as shown in the
figure.
COMPLETION
The assembly is now complete, and the transmitter programming can be started. Check the direction of rotation of all servos again.
Please refer to the rudder deflections and the exact center of gravity in the table. Now enjoy the first flight with your new Yak-11.
CENTER OF GRAVITY (CG)
CG: 110 – 115mm behind the leading edge