ATX
6
7
3.2.1 Receiver Installation and Binding
How to Match Code with Transmitter.
1. Put the transmitter and the receiver close to each other within 50 centimetres. 2. Turn on the transmitter,
then power on the RX6FG. 3. There is a black button on the RX6FG, press the binding button twice in two
seconds and release, receiver light starts blinking, after about blinking 8 times, match code success then
receiver signal LED always on! Attention: RX6FG default have not turn on the gyro function. Make sure the
RX6FG keep motionless when power on it, because the RX6FG will do the self-test. RX6FG with two indicate
LED, green LED on indicate normal working mode while both green and red LED on indicate gyro function
working mode.
3.2.2 Working Mode
The receiver has two working modes
：
normal working mode and gyro function working mode.
Normal Working Mode
Green LED, gyro will not be working.
Gyro Function Working Mode
Both green and red LED on. Receiver with gyro integrated to hold the vehicle in a straight line during
aggressive acceleration and braking or get bumped around by rough terrain. Receiver with gyro integrated
to keep the uni-direction and anti-slip.
3.2.3 How to Turn On Gyro Function
Quick press the ID SET switch two times within 1 second, the LED change from green to red means gyro
function has turn on.
Gyro Function Setup
Integrated Gyro, is used to assure the stability of cars on turning status; and keep on straight running even
the cars get some mechanical phantom. Gyro function can be enabled or disabled.
Gyro enabled
Gyro present disabled, and it enters post indication status. There are two indicators on the receiver. The
green one shows the receiver status and the red one is for gyro. When the led turns on, the gyro is enabled,
and the led turns off, gyro disabled.
Gyro enabled forward
Cars can be drove forward and backward, gyro is enabled forward or backward correspondingly. Like the
EP cars, different connection will make different direction, the gyro is ensured to be enable forward.
Gyro reverse
Same as a plane has reverse, car kit gyro has reverse as well. Only right set reverse gyro can act to correct.
