
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AFX4 XP
24
FLIGHT OPERATION STEPS
1.
Turn on the transmitter.
2.
Connect the battery with helicopter.
3.
The lights of the helicopter and the remote-control flash at the same time. Then push the throttle stick from top to bottom
quickly. The remote control makes a 'DI' sound, and the indicator lights of the helicopter and remote control are always on,
which means binding successful.
4.
Pull the two joysticks to outer eight angles to start the helicopter. (You can also press the one-key take-off button to take off
the helicopter directly.)
5.
Keep the helicopter head forward and keep safe distance with the helicopter.
6.
When manually operating the aircraft to land, please keep the throttle stick at the bottom for 2-3 seconds, and then release it
after the propeller has completely stopped rotating. (This operation is not required when using the one-key landing function).
CORRECTION METHOD
Press the trimming button when the helicopter has yaw problems.
The helicopter has set up hovering. If you are dissatisfied with hovering or the helicopter have a yaw, please follow these steps to
adjust.
Take off with the throttle joystick. According to the direction of yaw, press the fine-tuning button in the opposite direction until the
plane hovering.
Step 1
Step 3
Step 4
Forward flight
Keep a safe distance of more than 2 meters
Содержание 25313
Страница 1: ...AFX4 XP BEDIENUNGSANLEITUNG MANUAL...