© 2017 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com 19
5.
UPS Operation
5.1
UPS Input Connection
Plug the input of the UPS into a two-pole, three-wire, grounded receptacle. Avoid using extension cords.
ATTENTION:
This UPS is supplied with standard power cords and receptacles suitable for use in
your area of operation. It may be installed and operated by non-technical personnel.
If the mains voltage is within the acceptable range, and the bypass is enabled the UPS will enter bypass mode.
“BYPASS” will be displayed in the UPS status window on the LCD display. See Section 5.1.1 “LCD Display in
Bypass Mode”.
If instead the bypass is disabled, the UPS will enter standby mode. In this mode the UPS will not supply output
power to the load. See Section 5.1.2 “LCD Display in Standby Mode”.
5.1.1
LCD Display in Bypass Mode
Rack Display
Tower Display
5.1.2
LCD Display in Standby Mode
Rack Display
Tower Display
