AMETEK CTS
TWT Amplifiers
Quick Start and Safety Guide
V 1.0
4 / 10
1.
Safety
1.1
Safety Aspects
The amplifier described in this manual is designed to be used only by qualified personnel. Installation and use of
the amplifier in a manner not specified in this manual may impair the protection provided by the amplifier. Before
use, inspect the amplifier for damage which may impair safety.
There are no user-serviceable parts inside the amplifier, and any warranty is rendered void if the seals on any
covers are broken.
The following safety information is intended to protect all installers and operators, and to prevent damage to the
amplifier. It should be read and understood before installing and operating the amplifier.
1.2. Safety symbols and terms
This symbol warns of a potential risk of shock hazard. The symbol on an instrument
shows that that it can source 1000 volt or more, including the combined effect of normal
and common mode voltages. Use standard safety precautions to avoid personal contact
with these voltages.
This symbol indicates where a caution is required. Refer to the operating instructions lo-
cated in the manual to protect against personal injury or damage the equipment.
When used on the amplifier, warns the user of a non-ionising radiation hazard. When
used in this operation manual, alerts the user to the part of the manual that deals with a
non-ionising radiation hazard.
GROUND
protective ground terminal
Warns personnel to observe correct lifting practices.
CAUTION:
CAUTION:
indicates a potential hazard. It calls attention to a procedure, practice, or con-
dition which, if not followed, could possibly cause damage to equipment. Such damage
may invalidate the warranty. If a “
CAUTION”
is indicated, do not proceed until its condi-
tions are fully understood and met.
WARNING:
WARNING:
indicates a potential hazard. It calls attention to a procedure, practice, or con-
dition which, if not followed, could possibly cause bodily injured or death. If a “
WARNING
”
is indicated, do not proceed until its conditions are fully understood and met.
1.3
Safety Precautions
Observe all the following precautions to ensure personal safety and prevent damage to the amplifier or equip-
ment connected to it.