Ametek Sorensen Asterion AST Series, Руководство по эксплуатации

Страница: 49 / 118

DC Asterion Series Overview
M330460-01 Rev A 2-23
37 OUT_RY_ON POWER OUT
User digital output, cause to be assigned by
user or state of pin 11. Output high state either
min 5V or voltage on pin 30 (USER_PWR)
minus 1V, whichever is higher. Maximum
current of 0.5A.
38 REV_RY_ON POWER OUT
User digital output, cause to be assigned by
user or state of pin 10. Output high state either
min 5V or voltage on pin 30 (USER_PWR)
minus 1V, whichever is higher. Maximum
current of 0.5A.
39 AUX5_EN DIGITAL IN
Apply a high to enable output on pin 43
(5V_AUX). Up to 24V capable, 0.3V max low,
2.7V min high.
40 RTN* DIGITAL GND Return for Pin 39, 44.
41 RTN_AUX15* POWER GND Return for Pin 42.
42 15V_AUX POWER OUT 15V for use by the user, 1A max current.
43 5V_AUX POWER OUT 5V for use by the user, 1A max current.
44 AUX15_EN DIGITAL IN
Apply a high to enable output on pin 42
(15V_AUX). Up to 24V capable, 0.3V max low,
2.7V min high.
Table 2-11. Analog Programming and External User Control Interface Connector Pin out
* With the option, Remote Isolated Analog Interface control, the control signal return is isolated
from the output power negative terminal.
2.13.2 RS-232C Serial Interface
RS-232CFigure 2Figure 2-11Table 2Table 2-12Table 2Table 2-13 for pin descriptions.
The power source functions as Data Circuit-terminating Equipment (DCE). The cable
connecting to the Data Terminal Equipment (DTE) should be straight-through (one-to-
one contact connections). For EMC considerations a ferrite core can be added to the
cable Ametek P/N: 991-642-28, Manufacturer P/N: CS28B0642.
Figure 2-11. RS-232C Interface Connector
Connector Type
RS-232C Interface 9-contact receptacle (female) Subminiature-D.
Table 2-12. RS-232C Interface Connector Type