Ametek Solartron Metrology ORBIT3, Руководство пользователя

Страница: 10 / 13

Part No. 503094 Issue 7
9
7.0: Operation
7.0: Linear Encoder Operation
Finger Lift
Snaps over probe tip
enabling tip to be lifted
consistently and without
transferring heat to the
shaft.
Cable Lift
Allows tip to be retracted
without touching Linear
Encoder. Cable retract
screws into probe body
after removal of blanking
screw.
Pneumatic Operation
A Pneumatic nozzle
is fitted as standard
to LE/12/P & LE/25/P.
By applying air
between 0.5 & 0.8
bar, the measuring tip
will extend to meet
component under test.
On no account should
a pressure exceeding
1.0 bar be applied.
WARNING:
Damage/injury could be caused if the maximum
recommended
air pressure is exceeded.
CAUTION
Ensure that air supply for pneumatic
operation is clean, dry and oil free.
Cable Lift
Pneumatic Supply