Ametek ORTEC radEAGLET, Руководство пользователя

Страница: 47 / 140

radEAGLET User Manual radEAGLET Advanced Operations
ROI Left • ROI Right • Clear ROI
Specify a Region Of Interest, a part of a spectrum for closer inspection. Move the
cursor (see above) to the low-energy end of the region, set it as left end of the ROI,
move the cursor again and set the right end. The
radEAGLET fits a peak to the
ROI and displays the centroid energy and the number of counts for the ROI (Fig. 35 ,
p. 47 ).
Figure 35: Spectrum with Region Of Interest
Save
Save the current spectrum in the radEAGLET database. You can load saved spectra
for further analysis later (see below) or transfer them to a computer for further
perusal.
The file names of saved spectra are composed of the current date and time followed
by an index number. They will be shown after saving (Fig.
36 , p. 48 ).
Load
Load a saved spectrum for further processing. Choose a from a list of files saved
before (Fig.
37 , p. 48 ). The spectrum saved most recently is listed on top.
Load
Load the highlighted spectrum file.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Cancel
Cancel the current command.
LT • DT • RT
Cycle through the time and duration info displayed along the spectrum (Fig. 31 , p. 45 ):
© innoRIID GmbH • 2018-10-24 Software 3.2.0 • Document 3.2.2o 47/140