manualshive.com logo in svg

Ametek NB-3010, Руководство по эксплуатации, Страница: 22 / 24

Поделиться
Скачать
Ametek NB-3010 Скачать руководство пользователя страница 22

18

ONE YEAR LIMITED WARRANTY

Should Newage Testing Instruments, Inc. equipment require service, we will repair or 

replace, at our option, any part or product which upon examination by a Newage ser-

vice technician, shows to be defective in material or workmanship. 

Excluded from this warranty are any parts that are to be replaced as part of normal 

product operation, such as indenters, test blocks, and indenter shrouds.

This warranty is extended to the original purchaser only, for a period of one year (12 

months) from owners date of purchase. 

This warranty IS NOT VALID IF THE INSTRUMENT HAS BEEN 

MODIFIED,  MISUSED OR DAMAGED in any way.  This includes damage caused by 

disassembly by any person other than an authorized Newage Testing Instruments’ ser-

vice technician.

Please read all operating instructions according to the manual supplied with 

the instrument prior to operation.  This warranty applies only to instruments sold by 

Newage Testing Instruments, Inc. and its authorized distributors.

Newage Testing Instruments, Inc.. is not responsible in any way for losses, damage, or 

other form of consequential damage resulting from equipment failure 

or improper use. 

IMPORTANT: Register your instrument with Newage Testing Instruments, Inc. service 

department by filling out and returning the enclosed warranty registration card

Содержание NB-3010

























Отзывы:

Нет отзывов