Ametek Drexelbrook IntelliPoint RF RNL Series Скачать руководство пользователя страница 87

May 2018 

WHETHER ORAL, WRITTEN, EXPRESS, IMPLIED OR STATUTORY.  

NO IMPLIED OR STATUTORY WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE 

SHALL APPLY.  

VII. PATENTS/INDEMNITY 

If Buyer receives a claim that 

Products, or part thereof manufactured by Seller infringes a patent, 

Buyer shall notify Seller promptly in writing and give Seller information, 

assistance and exclusive authority to evaluate, defend and settle such 

claim.  Where Buyer has furnished specifications/designs for the 

manufacture of the allegedly- infringing Products, Buyer shall defend, 

indemnify and hold harmless Seller against third-party claims for 

infringement arising out of Seller’s use of such specifications/designs. 

VIII. 

LIMITATION OF LIABILITY 

The total liability of Seller on any claim, whether in contract, tort 

(including negligence of any degree and strict liability) or otherwise 

arising out of, connected with, or resulting from the manufacture, sale, 

delivery, resale, repair, replacement or use of any Products/Services, 

shall not exceed the price allocable to the Products/Services or part 

thereof which gives rise to the claim. 

IN NO EVENT, WHETHER AS A 

RESULT OF BREACH OF CONTRACT, WARRANTY, TORT, 

(INCLUDING NEGLIGENCE OF ANY DEGREE, STRICT LIABILITY OR 

PATENT INFRINGEMENT) OR OTHERWISE, SHALL SELLER, ITS 

AFFILIATES, SUBCONTRACTORS, OR SUPPLIERS BE LIABLE FOR 

ANY LOSS OF PROFIT OR REVENUES, LOSS OF USE OF THE 

PRODUCTS OR SERVICES, OR ANY ASSOCIATED EQUIPMENT, 

COST OF CAPITAL, COST OF SUBSTITUTE GOODS, FACILITIES, 

SERVICES OR REPLACEMENT POWER, DOWNTIME COSTS OR 

CLAIMS OF BUYER'S CUSTOMERS FOR DAMAGES OR FOR ANY 

SPECIAL, PROXIMATE, CONSEQUENTIAL, INCIDENTAL, INDIRECT 

OR EXEMPLARY DAMAGES.

 If Buyer transfers title to, or leases 

Products sold hereunder to, or otherwise permits or suffers use by, any 

third party, Buyer shall obtain from such third party a provision affording 

Seller and its subcontractors/suppliers the protection of the preceding 

sentence.  Any action against Seller must be brought within 18 months 

after cause of action accrues. 

IX. 

EXCUSABLE DELAYS  

A.  Seller shall not be liable for delays 

in delivery or failure to perform due directly or indirectly to causes 

beyond Seller's reasonable control including but not limited to: acts of 

God; war; terrorism; civil commotion; riots; embargoes; government 

regulations, orders, instructions or priorities; port congestion; acts of or 

failure to act on the part of Buyer or its agents/employees; fires; floods; 

sabotage; nuclear incidents; earthquakes; storms; epidemics; strikes; 

lockouts or other labor difficulties; shortages of or inability to timely 

obtain proper labor, materials, components, shipping space or 

transportation, fuel, supplies or power at current prices;  or due to 

limitations imposed by the extent of availability of Seller’s normal 

manufacturing facilities.  

B.  If a delay excused per the above extends for more than 90 days and 

the parties have not agreed upon a revised basis for continuing providing 

Products/Services at the end of the delay, including adjustment of the 

price, then either party (except where delay is caused by Buyer, in which 

event only Seller) upon thirty (30) days’ notice may terminate the Order 

with respect to the unexecuted portion of the Products/Services, 

whereupon Buyer shall promptly pay Seller its reasonable termination 

charges upon submission of Seller's invoices thereof.  

X. 

SOFTWARE/TECHNICAL/PROPRIETARY INFORMATION  

A.  Buyer shall not acquire any rights to any software which may be 

delivered with Products, except as granted in Seller’s standard software 

license.  Any software license granted in connection with Products shall be 

an interim license, which may be withdrawn, pending payment for Products 

in full.   

B.  The purchase of Products shall not include any right to supply of 

technical information such as drawings or specifications.   

C.  Proprietary information, including drawings, documents, technical data, 

reports, software, designs, inventions and other technical information 

supplied by Seller in connection herewith (hereinafter called "Data"), shall 

remain Seller's sole property and shall be held in confidence by Buyer.  

Data shall not be reproduced, used or disclosed to others by Buyer without 

Seller’s prior written consent.  Upon completion of Order, Buyer shall 

promptly return all Data to Seller together with all copies or reprints thereof 

then in Buyer's possession or control, and Buyer shall thereafter make no 

future use, either directly or indirectly, of any Data or any information 

derived therefrom without Seller's prior written consent. The foregoing shall 

in no way obligate Seller to provide or supply Data. 

XI. 

DIES, TOOLS, PATTERNS  

Seller’s charges for dies, molds, 

patterns and the like represent the Buyer’s proportionate cost thereof, it 

being expressly understood that they remain the property of Seller.  

Modifications made to dies, molds, patterns and the like in order to 

manufacture Products shall be at the discretion of Seller. 

XII. 

GENERAL  

A.  

The rights and obligations of the Buyer and 

Seller hereunder shall be governed in all respects by the law of the 

Commonwealth of Pennsylvania, U.S.A.  The exclusive forum for 

adjudication of any disputes shall be the federal or state courts of the 

Commonwealth of Pennsylvania, and Buyer/Seller hereby consent to 

personal jurisdiction and venue in such courts in any proceeding. The 

United Nations Convention on the International Sale of Goods shall not 

apply. 

B. These Terms and Conditions of Sale together with any other terms 

specifically agreed to in writing by Seller constitute the entire agreement 

between Buyer and Seller and supersede any prior or contemporaneous 

representations, agreements, proposals, warranties, or understandings, 

oral or written, express or implied.  No waiver, modification, amendment, 

rescission or other change to these Terms and Conditions of Sale shall 

be binding unless specifically agreed to in writing by an authorized 

representative of Seller. 

C.  The invalidity, of any part hereof shall not affect the validity of the 

remainder. The failure of Seller to assert any right at any time hereunder 

shall not prevent Seller's subsequent assertion of the same or different 

rights. 

D.  Buyer may not assign this contract without the prior written approval 

of the Seller. 

XIII. 

PROHIBITION FOR HAZARDOUS USE 

Products sold hereunder are not intended for application in, and shall not 

be used by Buyer in construction or application of a nuclear installation 

or in connection with use or handling of nuclear material or for any 

hazardous activity or critical application, where failure of a single 

component could cause substantial harm to persons or property, unless 

Products have been specifically approved for such activity or application.  

Seller disclaims all liability for loss or damage resulting from such 

unauthorized use and Buyer shall defend, hold harmless and indemnify 

Seller against any such liability, whether arising under breach of 

contract, warranty, tort (regardless of the degree of fault or negligence), 

strict liability or otherwise. 

Where Seller approves the application of the Products in a nuclear 

facility, the Buyer shall, before such use or provision, arrange for 

insurance or governmental indemnity protecting the Seller against 

liability and hereby releases and agrees to indemnify the Seller and its 

suppliers for any nuclear damage, including loss of use, in any manner 

arising out of a nuclear incident, whether alleged to be due, in whole or 

in part to the negligence or otherwise of the Seller or its suppliers.

XIV. 

STATUTORY REQUIREMENTS 

Seller reserves the right to make any changes in the general 

specifications of the Products which are required for the Products to 

conform to any statutory requirement. 

XV. 

GOVERNMENT CONTRACTS 

Only Federal Acquisition Regulation (“FAR”) supplement clauses 

expressly accepted in writing by Seller shall be included or incorporated 

by reference herein.  Seller shall not be bound by and makes no 

representation of compliance with any FAR or FAR supplement clauses 

that Seller shall not have expressly accepted in writing. 

Содержание Drexelbrook IntelliPoint RF RNL Series


























































































Отзывы: