Ametek Land 812674, Руководство по установке

Страница: 6 / 12

Page 2
Installation Guide LSP-HD PSU Module
UL Approved
2 System Overview
It is important to check the equipment with which you have been supplied and
then read these instructions thoroughly before proceeding with operation.
For information on other LSP-HD system accessories, see the Installation Guide
Publication Nº 805384
2.1 LSP-HD Cable assembly
It is expected that the LSP-HD PSU (UL Approve) will be used with conduit.
Remove the connector from the LSP-HD cable, pass through the conduit, and
connect to the instrument terminals as shown in Drawing Nº 740.077 (Section 5
of this Guide.
2.2 Schematic Diagram
Power Supply
Accessory
(Optional)
Plate Mounted
Blower unit
Mounting Accessory
LSP-HD
Scanner
LSP-HD
Cables
Floatline
services cable
(Optional)
PSU I/O
Processor
Process Control
PC (WCA)
Landscan
Configuration
Software
Customer Connections
UL508A Industrial Control Panel - Schematic Diagram