manualshive.com logo in svg

Amersham Biosciences Hoefer DALT, Руководство пользователя, Страница: 33 / 70

Поделиться
Скачать
Amersham Biosciences Hoefer DALT Скачать руководство пользователя страница 33

Hoefer DALT System

Loading and Running Second Dimension Gels

Amersham  Bioscienes

 

29

Loading the IPG Strips onto the DALT Slab Gels

Place the DALT gels in the dish rack in alphabetical/numerical order, with respect to the 

identification label, with the sample application surface of the slab up and the label 

readable from the front. Be sure to record gel identification numbers. 

1. Dip the equilibrated IPG strip in SDS electrophoresis buffer to lubricate it, then 

place the IPG gel strip onto the DALT gel cassette. (See Figure 16.)

Position the IPG strip between the plates, touching the surface of the second 

dimension gel, with the plastic backing against one of the glass plates. For a 

convenient reference, place the pointed, acidic, end of the IPG strip on the same side 

as the gel label.   

Figure 16.

For reference, 

place the pointed end of 
the IPG strip above the gel 
label 

 

Use a thin plastic spatula or ruler to push against the plastic backing of the IPG 

strip, 

not

 the gel itself, and move the strip down into contact with the surface of the 

second dimension gel. The edge of the strip should just rest on the surface of the 

slab gel. Avoid trapping air bubbles between the plastic backing and the glass plate 

or cutting into the SDS gel with the strip. The gel face of the strip should not touch 

the opposite glass plate. 

2.

Optional

: Apply size marker proteins.

Apply the markers to a paper IEF sample application piece in a volume of 15 – 

20

µ

l. For less volume, cut the sample application piece proportionally. Place the 

IEF application piece on a glass plate and pipette the marker solution onto it. Apply 

approximately 50 

µ

l agarose sealing solution to seal markers in the sample 

application pieces. Pick up the application piece with forceps and apply to the top 

surface of the gel next to one end of the IPG strip. The markers should contain 

200 – 1000 ng of each component for Coomassie staining and about 10 – 50 ng of 

each component for silver staining.

3. Slowly moving the pipette from left to right across the gel, deliver agarose sealing 

solution onto the IPG strip to seal it into place. Carefully avoid bubbles when 

sealing with the agarose. (See Figure 17.) Wait 2 – 5 minutes to allow the agarose to 

fully solidify before proceeding.

Pointed, acidic (+) end 
on same end as gel label.

Содержание Hoefer DALT







































































Отзывы:

Нет отзывов