Relamping Instructions-
Ballast Maintanence-
1: Remove Perforated Panel by
disengaging clips (see previous page).
*To reassemble follow these steps in reverse.
2: Remove (2) screws holding
Faceplate/Gimbal Assembly.
3: Remove Faceplate/Gimbal Assembly.
4: Disconnect from power via
quick-disconnect.
5: Remove (2) screws holding ballast
plate assembly.
6: Disconnect from power via
quick-disconnect.
Ballast Tray
Assembly
Ballast Mounting
Bracket
Thermal
Protector
Quick Connect
to Power Source
Ballast
Quick Connect
to Lamp Socket
1: Release front door assembly via
1
4
Turn CCW.
2: Remove front door assembly.
3: Relamp.
4: Replace and secure front door
assembly via
1
4
Turn CW.
Install correct lamps
.
See relamping label on module for the
correct wattage.
MAKE SURE TO DISCONNECT ALL ELECTRICAL CONNECTIONS BEFORE RELAMPING
.
LIGHTING SOLUTIONS
AMERLUX
ADAPT. ABILITY.
R
TM
INSTALLATION INSTRUCTIONS
SHEET #:
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
www.amerlux.com
689-0353 Sheet 3 of 5