AmeriWater SILEX 00M20821, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 25

3
INSTALLATION IN 10 EASY STEPS
1. Locate the Silex system on a firm, level foundation.
2. It is recommended, but not required, to locate
the system near a standard floor drain or sump
and a 115 Volt receptacle.
3. It is recommended to install shut-off valves on
the inlet and outlet sides of each unit to
facilitate changing of resin packs.
4. Connect the inlet supply hose to the hose barb
fitting on the left side of the system (while
facing the label). Use the hose clamps
provided with the system to secure the hose to
the hose barb fitting.
SILEX HOSE KIT # 0119-0006