How to adjust the Auto Snooze:
Turn the unit around and
locate the
AUTO SNOOZE
switch.
Set the switch to
ON
to
activate the Auto Snooze
feature.
How to set the time:
How to set the alarm:
How to select the ALARM mode:
Slide the
ALARM
switch to
the Audio or Bedshaker
position.
To interrupt the alarm
momentarily, press the
SNOOZE
button. In order for
this feature to work, the Auto
Snooze must be
ON
(See the
next section for instruction on
adjusting the Auto Snooze).
The alarm will go off again
in nine minutes and stay on,
unless the
SNOOZE
is
pressed again or the alarm
is turned off.
To shut off the alarm and
stop completely, slide the
ALARM
switch to the
OFF
position.
Press and hold the
SET
CLOCK
button down.
Push the
HOUR
button
until the desired hour
[AM or PM] appears
on the display panel.
Repeat Step 2 using
the
MINUTE
button to
set desired minute.
Press and hold the
SET
ALARM
button down.
Push the
HOUR
button
until the desired hour
[AM or PM] appears
on the display panel.
Repeat Step 2 using
the
MINUTE
button to
set desired minute.
How to adjust the Audio
tone and volume:
Slide the
ALARM
switch to
the Audio position.
Adjust the volume by
sliding the
VOLUME
control
bar to the desired level.
Adjust the tone by sliding
the
TONE CONTROL
bar to
suit your hearing.
How to use the Bedshaker:
Plug the Bedshaker into
the “Bedshaker” port
on the back of the Big
Time.
Place the Bedshaker
under a pillow or mat-
tress.
Select
SHAKER
when
choosing the ALARM
mode.
