background image

 

A Black Cap protects the 
hydraulic mechanism on 
the Support Cylinder. 

Place the wide end of 
the Support Cylinder 
into the center hole. 

Place the Foot Cap over 
the center hole on the 
base plate. 

Press the Support 
Cylinder down firmly 
into the center hole. 
and press down 
FIRMLY. 
 

Press the Seat onto 
the narrow end of 
Support Cylinder.  
 

Remove the Black Cap and 
discard it before assembly. 
The Orange hydraulic 
button will become visible. 
 

 
ASSEMBLY INSTRUCTION

 

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the 
Seat. To lower, grasp the Handle and pull upward while sitting on the Seat.  
 
 

To disassemble, turn the stool upside down, and hit 
the clip on the center of the bottom of the base with 
a rubber mallet to disengage the locking 
mechanism. Then, turn the stool right side up, and 
lift the Seat upward, pulling the Seat Assembly off 
of the Support Cylinder.  
 
 

Use  a  wrench  to  attach  the  Seat 
Plate to the underside of the Seat 
with the provided bolts.  

Metal Clip 

Отзывы: