AmeriGlide Victorian Outdoor Elevator, Руководство по установке

Страница: 29 / 39

Step 23: Install Upper Landing Gate
• Landing Gate
• 18 - Wood Screw, Flat, #12
• Shims (if necessary) upper screws.
Materials
Install
1. Place the upper gate into position.
Ensure the sill angle bracket rests
flush with the foundation.
2. Use a #12 Wood Screw to temporarily fasten upper landing gate into place.
3. Level the hinge side of gate upright and use #12 screws to fasten into place.
4. Using a #12 Wooden Screw, temporarily fasten the latch side of the gate
into place.
5. Level the latch-side upright and use #12 Wooden Screws to fasten firmly
into place.
6. Level the platform (use shims) and fasten #12 Wood Screws into the
remaining holes on the sill angle bracket.
7. Drill a 1-inch hole into the floor on the Interlock side for Call Station and
Interlock wiring.
TIP: You can install the upper gate later during the install process because you have to make sure it is aligned
with the platform side walls.
Scan to watch!
more videos can be found at
youtube.com/ameriglide
INSTALL UPPER LANDING GATE CONT.
B
A
C
How to Adjust Gate Video
(3 minutes)
28