These insTrucTions should noT be fAxed or reproduced on A digiTAl copier. AmericAn WoodmArk corporATion provides These insTrucTions on An “As is” bAsis And disclAims Any And
All liAbiliTy for Any inAccurAcies, omissions or TypogrAphicAl errors cAused by Any Third pArTy’s equipmenT. When you use these instructions, you are consenting to be bound by the provisions
in this paragraph. These instructions provide an illustrative method for installing American Woodmark corporation (“AWc”) cabinets and/or accessories. AWc’s instructions are not intended to address every possible
contingency that might be encountered during installation or to endorse the use of any particular tools. AWc hereby expressly disclAims All liAbiliTy for Any clAims for inJury or deATh relATed To or
bAsed upon The use of These insTAllATion insTrucTions And Any insTAllATion insTrucTions oTherWise provided by AWc.
provides decorative and functional space
below or beside wall cabinets.
Contents
• Spice Drawer Cabinet Unit or Storage
cube unit
Tools Needed
• Phillips Screwdriver
• Drill
• 5/32” Drill Bit
• Bit Extension
• Pencil
• Ruler
• Safety Glasses
Additional Items Needed
(not included)
• (2) #10 x 2-1/2” Pan Head Screws
• (6) #6 x 1” Flat Head Screws
Spice Drawer Cabinet or Storage Cube
For Use in Attaching Unit to Wall Cabinets Horizontally or Vertically
Horizontally Under Wall Cabinet:
determine the wall cabinets that the unit is to be installed under, and locate any wall
studs in the area where the unit will be installed.
remove the drawers from the unit.
hold/clamp the unit into place, making sure that the face of the unit is flush with the
face of the wall cabinets above.
Using the 5/32” drill bit, drill two
attachment holes through the unit top and
into the wall cabinet frame horizontal, 1/4”
back form the face of the unit, making sure
not to drill completely through the frame
horizontal. See Figure 1.
Pre-drill and attach the Unit to the wall with
the #10 x 2-1/2” pan head screws in two
places, preferably into the wall studs. do
NOT TIGHTEN SCREWS YET! See Figure 2.
secure the unit to the wall cabinet above
with the #6 x 1 ” flat head screws in the
locations drilled in Step 4.
Tighten the screws placed through the back
in Step 5.
spice drawer cabinet only: place the
drawers back into the unit. drawer knobs
may need to be removed and oriented
correctly. it is now ready to use.
See other side for installing the Unit in a vertical position.
1
Spice Drawer Cabinet Horizontal
Figure 1
SC30
Storage
Cube
Figure 1
2
3
4
5
6
7
Procedure
8
Horizontal Installation
Vertical Installation
Spice Drawer Cabinet Horizontal
Figure 2
Wall
Stud
Figure 2
Wall
Stud
5/32" Pre-drilled
Hole
5/32" Pre-drilled Hole
Front View
99868 8/10
Installation Instructions
Read carefully before you begin installation
