American Water Heater Compact 10, Инструкция по эксплуатации

Страница: 10 / 24

10
INSTALLATION CONSIDERATIONS INSTALLATION CONSIDERATIONS
INLET
3/4” (FEMALE)
NPT
OUTLET
3/4” (FEMALE)
NPT
2 1/2”
(63.5 mm)
JUNCTION
BOX
D
FRONT VIEW
DEL 30/40/50
DRAIN
VALVE
B
C A
FRONT VIEW
DEN 30-52
DRAIN
VALVE
B
A
2 1/2”
(63.5 mm)
INLET
3/4” (FEMALE)
NPT
OUTLET
3/4” (FEMALE)
NPT
JUNCTION
BOX
D
TOP VIEW
DEL 30/40/50
TOP VIEW
DEL 6/10/15/20
TOP VIEW
DEN 30 - 52
INLET
3/4” (FEMALE)
NPT
OUTLET
3/4” (FEMALE)
NPT
FRONT VIEW
DEL 6/10/15/20
*(NO SIDE OUTLET AVAILABLE FOR DEL-6 MODELS)
3/4” NPT
RELIEF VALVE
OPENING
ALTERNATE OUTLET
3/4” (FEMALE) NPT
ELECTRICAL
CONNECTION
C A
B
3/4” NPT
RELIEF VALVE
OPENING
C
3/4” NPT
RELIEF VALVE
OPENING
ANODES ANODE
Figure 2. Rough-In Dimensions
Table 2. Rough-In Dimensions
Models Di-
mensions
No. of
Elements
Tank Capacity A B C D
Approx.
Shipping Weight
US Gals Liters Inches mm Inches mm Inches mm Inches mm Lbs. kg.
Compact-6 1 6 23 15.50 394 14.25 362 11.00 279 - - 35 15.9
Compact-10 1 10 38 18.25 464 18.00 457 12.50 318 - - 54 24.5
Compact-15 1 15 57 26.00 660 18.00 457 20.50 521 - - 58 26.3
Compact-20 1 20 76 22.25 565 21.75 552 15.38 391 - - 73 33.1
Lowboy-30 2 36 136 32.00 813 24.00 610 24.00 610 8.00 203 118 53.5
Lowboy-40 2 38 144 32.00 813 23.00 584 24.00 610 8.00 203 118 53.5
Lowboy-50 2 51 193 36.00 914 26.50 673 25.00 635 8.00 203 172 78.0
Tall-30 2 40 151 49.75 1264 20.50 521 53.25 1353 8.00 203 118 53.5
Tall-40 2 50 189 59.00 1499 20.50 521 51.25 1302 8.00 203 125 56.7
Tall-52 2 55 208 56.50 1435 24.00 610 48.50 1232 8.00 203 145 65.8
LOCATING THE WATER HEATER
Property Damage Hazard
•
All water heaters eventually leak.
•
Do not install without adequate drainage.
CAUTION
The water heater should be located as close as possible to/or
centralized to the water piping system. The water heater should be
located in an area not subject to freezing temperatures.
The water heater should be located in an area where leakage of the
tank or connections will not result in damage to the area adjacent to
the heater or to lower floors of the structure.
When such locations cannot be avoided, a suitable drain pan should
be installed under the heater.
Such pans should be at least two inches deep, have a minimum
length and width of at least two inches greater than the diameter of
the heater and should be piped to an adequate drain.
Drain pans suitable for these water heaters are available from
your distributor or A.O. Smith Water Heater Parts Fulfillment, 125
Southeast Parkway, Franklin, TN 37068.
Printed on 7/25/2022 7:17 AM CT